IPMI: Difference between revisions

From DWIKI
 
(12 intermediate revisions by the same user not shown)
Line 18: Line 18:
*bmc/ipmi seems to prefer to be on primary network interface, using a DIFFERENT ip from the actual network  
*bmc/ipmi seems to prefer to be on primary network interface, using a DIFFERENT ip from the actual network  


 
=Tools=
==Scan network for ipmi==
http://fish2.com/ipmi/tools/ztools.html or better yet: https://github.com/zenfish/ipmi
 
= HOWTO =


= ipmitool commands =
==ssh shell==
https://iamsto.wordpress.com/2022/12/06/cheatsheet-ipmi-ssh-cli-commands/


== Configuring IPMI ==
== Configuring IPMI ==
==Network configuration==
=== Check ipmi network settings ===
ipmitool -I open lan print 1
or just
ipmitool lan print 1
=== Check lan/network configuration ===
ipmitool -I open lan print


=== Set network to dhcp ===
=== Set network to dhcp ===
Line 28: Line 46:
  ipmitool lan set 1 ipsrc dhcp
  ipmitool lan set 1 ipsrc dhcp


 
===Set network to static===
ipmitool lan set 1 ipsrc static
 
=== Change ip address ===
 
ipmitool lan print 1
ipmitool lan set 1 ipaddr x.x.x.x
ipmitool lan set 1 netmask 255.255.255.0
ipmitool lan set 1 defgw ipaddr x.x.x.x
 
 
=== Add vlan ID ===
ipmitool lan set 1 vlan id 22


== Managing users ==
== Managing users ==
Line 40: Line 70:
  ipmitool user set password 2
  ipmitool user set password 2


 
 
==Show user privilege level==
ipmitool channel getaccess 1 3


== Reading status ==
== Reading status ==
Line 63: Line 95:




=== Check ipmi ===
ipmitool -I open lan print 1
=== Check lan/network configuration ===
ipmitool -I open lan print


=== Serial console over LAN ===
=== Serial console over LAN ===
Line 103: Line 128:


= FAQ =
= FAQ =
==ipmitool==
===Error: Unable to establish IPMI v2 / RMCP+ session===
You might have firmware that doesn't support IPMI v2/ RMCP+
Try -I lan instead of -I lanplus


== ipmitool user list ==
 
 
=== ipmitool user list ===


Get User Access command failed (channel 14, user 1): Invalid data field in request.
Get User Access command failed (channel 14, user 1): Invalid data field in request.


== Unable to send IPMI presence ping packet ==
=== Unable to send IPMI presence ping packet ===


yeah, could be anything again
yeah, could be anything again


== IPMI LAN send command failed ==
=== IPMI LAN send command failed ===


== Unable to send IPMI presence ping packet ==
=== Unable to send IPMI presence ping packet ===


== Change ip address ==


ipmitool lan print 1
ipmitool lan set 1 ipaddr x.x.x.x
ipmitool lan set 1 defgw ipaddr x.x.x.x
        
        
== IPMI command failed: Request data field length limit exceeded ==
=== IPMI command failed: Request data field length limit exceeded ===
If you're trying to set a password, try a more complex password.
If you're trying to set a password, try a more complex password.


== ipmitool -v Get Auth Capabilities error ==
=== ipmitool -v Get Auth Capabilities error ===


could be firmware/version issue
could be firmware/version issue


==Error: Unable to establish IPMI v2 / RMCP+ session==
 
Try -I lan instead of -I lanplus
 
===Info: SOL payload already active on another session===
Try sol deactivate
 
=== Set Session Privilege Level to ADMINISTRATOR failed: Unknown (0x80) ===
You're probably trying to connect as user, so try
ipmitool -L USER ....

Latest revision as of 09:12, 6 February 2024

Intelligent Platform Management Interface

Docs

Considerations

  • bmc/ipmi seems to prefer to be on primary network interface, using a DIFFERENT ip from the actual network

Tools

Scan network for ipmi

http://fish2.com/ipmi/tools/ztools.html or better yet: https://github.com/zenfish/ipmi

HOWTO

ssh shell

https://iamsto.wordpress.com/2022/12/06/cheatsheet-ipmi-ssh-cli-commands/

Configuring IPMI

Network configuration

Check ipmi network settings

ipmitool -I open lan print 1

or just

ipmitool lan print 1

Check lan/network configuration

ipmitool -I open lan print


Set network to dhcp

ipmitool lan set 1 ipsrc dhcp

Set network to static

ipmitool lan set 1 ipsrc static 

Change ip address

ipmitool lan print 1
ipmitool lan set 1 ipaddr x.x.x.x
ipmitool lan set 1 netmask 255.255.255.0
ipmitool lan set 1 defgw ipaddr x.x.x.x


Add vlan ID

ipmitool lan set 1 vlan id 22

Managing users

List users

ipmitool user list 1

Change password

2 is usually ADMIN

ipmitool user set password 2


Show user privilege level

ipmitool channel getaccess 1 3

Reading status

( also see http://sources.redhat.com/cluster/wiki/IPMI_FencingConfig)

Simple status check

ipmitool -I lanplus -H <IPADDR> -U root -P changeme chassis status

Get some hints about commands

ipmitool -I open help

 

List all sensors

ipmitool -I lanplus -H <IPADDR> -U root -P changeme sdr elist full

or

 ipmitool -I lanplus -H <IPADDR> -U root -P changeme sensor


Serial console over LAN

ipmitool -U root -I lanplus -H 10.0.0.91 sol activate

Boot a remote box

ipmitool -U root -I lanplus -H 10.0.0.91 chassis power on

 

Sensor information

ipmitool -I open sensor

PSU status

ipmitool -I open sdr type "Power Supply" Status

 

Shut down a remote box

ipmitool -U root -I lanplus -H 10.0.0.91 chassis power off
ipmittool -U root -H 10.0.0.91 -E shell

On freeBsd

kldload ipmi

 

FAQ

ipmitool

Error: Unable to establish IPMI v2 / RMCP+ session

You might have firmware that doesn't support IPMI v2/ RMCP+

Try -I lan instead of -I lanplus



ipmitool user list

Get User Access command failed (channel 14, user 1): Invalid data field in request.

Unable to send IPMI presence ping packet

yeah, could be anything again

IPMI LAN send command failed

Unable to send IPMI presence ping packet

IPMI command failed: Request data field length limit exceeded

If you're trying to set a password, try a more complex password.

ipmitool -v Get Auth Capabilities error

could be firmware/version issue


Info: SOL payload already active on another session

Try sol deactivate

Set Session Privilege Level to ADMINISTRATOR failed: Unknown (0x80)

You're probably trying to connect as user, so try

ipmitool -L USER ....